6.6 Keypad Operation
7.
Push
or
The configuration procedure is complete.
■
Set the Sampling Time
The procedure in this section shows how to set the sampling time for data logging.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
or
482
to select the monitor number to be logged, then push
, push
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
(Back), and then push
.
(Setup).
.
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
.
to show [Home].