4.7 Install the Keypad in a Control Panel or Another Device
A - Keypad
B - M3 screws
4.
Use the extension cable to connect the drive to the keypad.
A - Extension cable
B - Communications connector
C - Drive
■
Mount to the Inside of Control Panel
Installation support sets A or B (sold separately) are necessary for Internal/Flush-Mount installation. To order optional
accessories, contact Yaskawa or your nearest sales representative.
Note:
• The installation procedure and panel cut-out dimensions are the same for mounting brackets A and B.
• Use a gasket between the control panel and the keypad in environments with a large quantity of dust or other unwanted airborne material.
320
Figure 4.13 Mount to the Outside of Control Panel
Figure 4.14 Connecting the Drive and Keypad with the Extension Cable
C - Enclosure panel
D - Screw mounting holes
D - Keypad
E - Cable connector
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting