YASKAWA GA800 Maintenance & Troubleshooting page 322

4.7 Install the Keypad in a Control Panel or Another Device
A - Keypad
B - Mounting bracket A
4.
Put the mounting bracket that has the attached keypad in the control panel, and use the screws to attach it
from the outside.
Use the screws included with the installation support set to attach it. Tighten the screws to a correct tightening
torque:
• M4 screws: 0.98 N∙m to 1.33 N∙m (8.67 in∙lb to 11.77 in∙lb)
A - M4 screws
322
Figure 4.17 Attach Keypad to Mounting Bracket
Figure 4.18 Mount Mounting Bracket to the Interior of the Control Panel
C - M3 screws
D - Screw mounting holes
B - Enclosure panel
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting