YASKAWA GA800 Maintenance & Troubleshooting page 34

1.4 Replace Cooling Fans and Circulation Fans
■
Fan Installation
Reverse the removal procedure for fan installation.
1.
Connect the relay connectors between the drive and cooling fans.
2.
Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
Make sure that the cables and connectors are in the correct space.
*1
34
Figure 1.16 Connect the Relay Connectors
Figure 1.17 Install the Cooling Fans
Figure 1.18 Put the Cables and Connectors in the Drive Recess
C - Front of drive
B - Space for cables
*1
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting