Usps 4-State - Honeywell A700 Hardware Reference Manual

Registry Key
KoreaPostBarCodeLengthL1
KoreaPostBarCodeLengthL2
KoreaPostBarCodeLengthL3
KoreaPostBarCodeLengthMode
KoreaPostCodeMark
KoreaPostUDSI

USPS 4-State

Support for the parameters in the table is labeled as follows:
= Parameter is supported and available via the Scanner Options tab in the device profile.
ü
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\USPS 4-State]
Registry Key
USPS4CBActivation
USPS4CBCodeMark
USPS4CBUDSI
65
Default
A730
Value
0x04 X
0x00 X
0x00 X
0 X
0x2A X
P9 X
Default
A730
Value
0 X
0x2A X
PA X
Voice Device and Headset Hardware Reference Guide
A730x Description
Length value L1. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L2. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L3. Range is 0x0 to 0xFF
ü
(0 to 255).
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
ü
supported on A730x,
2 = "L1 is min, L2 is max length".
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the symbology.
ü
0x00 - 0xFF
ü
User-defined symbology identifier.
ü
Range is 0-4 characters.