NOTE
Packaging varies for product shipments. Generally, packing materials are about 15% of the
total shipment weight.
SRX2/SRX3 Battery Specifications
NOTE
The SRX2 and SRX3 headsets use the same battery.
Electrical Specifications
Cells: The battery pack uses a single lithium ion cell.
l
Nominal voltage = 3.6V
l
Watt hours = 2.7 WHr
l
Protection circuit characteristics: The pack contains a protection circuit that prevents over
l
and under voltage conditions on the cell and protects the pack from damage as a result of
a short circuit between the positive and negative terminals of the battery.
The battery pack contains custom electronic that provide performance, temperature, and
l
pack identification to the device. This information is made available to voice management
software.
Battery Charging: The battery pack must be charged only in a Honeywell designated
l
charger.
Mechanical and Environmental Specifications
Drop-test specifications: The battery meets the transient drop criteria.
l
24 drops at 6 feet (182.88 cm)
o
12 drops at 7 feet (213.36 cm)
o
227
Voice Device and Headset Hardware Reference Guide