Position The Talkman A700/A700X Vmt; Install The Mounting Brackets - Honeywell A700 Hardware Reference Manual

Voice device and headset
Hide thumbs Also See for A700:
Table of Contents

Advertisement

Position the Talkman A700/A700x VMT

NOTE
Do not connect the vehicle mount holder directly to the vehicle. Use an approved mounting
device to prevent damage to the device from shock and vibration.
1. Determine the best position for the device and all the associated components. For optimal
antenna positioning, the device should be placed in the same orientation as it would if it
was worn on the body. If a similar device was previously installed, check to see if the
position it used is suitable for the device.
2. Test the installation for at least 30 minutes before installing on another vehicle. Record all
details:
Check that the position of the device does not obstruct vehicle controls.
l
Check that the device does not obstruct the driver's view.
l
Check the position of the device for user comfort over long periods.
l

Install the Mounting Brackets

WARNING
The device must be mounted in accordance with accepted aftermarket practices and
materials supplied by Honeywell and/or RAM Mounting Systems. Honeywell does not
support Talkman devices which are not mounted in an approved manner. Please note that
not mounting Talkman devices in an approved manner may also violate local safety laws and
possible cause a safety hazard by damaging Talkman devices and batteries.
Follow these steps to install a mounting bracket.
1. Drill the holes required to secure the base to the vehicle. If using the clamp mount, skip this
step.
2. Screw or clamp a base to the location.
Tip: Apply some lubricant (for example, light oil or anti-sieze) to the threads of the clamp
mount screws.
3. Attach the other base to the other end of the arm and tighten once in the desired location
by turning the locking lever clockwise.
4. Screw the device holder to the base.
IMPORTANT
To prevent vibration, the arm of the mounting bracket should not touch the stem of the ball
of the base. In other words, the arm should not be tilted so far that these pieces touch.
Voice Device and Headset Hardware Reference Guide
86

Advertisement

Table of Contents
loading

This manual is also suitable for:

A700x

Table of Contents