Pdf417 - Honeywell A700 Hardware Reference Manual

Registry Key
UPC-ATransmittedasEAN-13
UPC-ETransmittedasUPC-A
EAN-8TransmittedasEAN-13
EANUPCAdd-OnDigits
EANUPCGTINProcessing
ISMNConversionforEAN-13
ISSNConversionforEAN-13
UPC-AUDSI
UPC-EUDSI
EAN-8UDSI
EAN-13UDSI

PDF417

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\PDF417]
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0x1
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
A0
ü
E0
ü
FF
ü
F
ü
A730x Description
Enables conversion of UPC-A to EAN-
ü
13.
Enables conversion of UPC-E to UPC-A.
ü
Enables conversion of EAN-8 to EAN-
X
13.
Add-on digit requirement, where 0 =
ü
optional and 1 = required.
Converts EAN-13 bar codes to GTIN
X (Global Trade Item Number)-compliant
format.
Converts EAN-13 bar codes starting
X with "9790" to ISMN (International
Standard Music Numbering) format.
Converts EAN-13 bar codes starting
X with "977" to ISSN (International
Standard Serial Number) format.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
54