Wearing An Srx2/Srx3 Wireless Headset; Installing The Stability Strap On The Srx2/Srx3 Wireless Headset - Honeywell A700 Hardware Reference Manual

Wearing an SRX2/SRX3 Wireless Headset

1. Put the headset on and adjust the ear pad to fit snugly over your ear.
2. Position the t-bar directly above, and as closely as possible to, your other ear.
3. If installed, adjust the stability strap so it fits securely across the back of your head.
4. Rotate the electronic module up or down to position the microphone near your mouth.
5. Make final adjustments with the flexible boom so that the microphone is positioned
correctly. Position the microphone as close to your mouth as possible, but outside of your
breath stream. It should be facing your upper lip, and not touching anything (for example,
clothing, skin, or facial hair).
Installing the Stability Strap on the SRX2/SRX3
Wireless Headset
1. Hold the headset so that the earpad faces you and the electronic module faces away.
2. Locate the knob on the inside of the headband near the earpad.
3. Hold the strap so that the end with the hole fits over the knob on the headband, and press
down firmly so the knob comes all the way up through the hole.
135 Voice Device and Headset Hardware Reference Guide