Data manipulation parameters provide for the manipulation of data after the barcode is
l
scanned.
Symbology Specific
Symbology specific parameters enable, disable, and configure the specified symbology.
Parameter support is identified as follows:
X = Parameter is supported and available via Device Profile settings.
N/A = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though they
can (with knowledge) be set via the CCI or advanced settings.
Postnet
Support for the parameters in the table is labeled as follows:
ü
= Parameter is supported and available via the Scanner Options tab in the device profile.
X
= Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Postnet]
Registry Key
PostnetActivation
PostnetCodeMark
PostnetCheckDigitTransmission
PostnetUDSI
Planet
Support for the parameters in the table is labeled as follows:
33
Default
A730
Value
0x0
ü
0x2a
ü
0x1
ü
P0
ü
Voice Device and Headset Hardware Reference Guide
A730x
Description
Enables the Postnet symbology.
ü
A single character inserted before the
barcode data to indicate the
ü
symbology.
X
Enable transmission of the check digit.
User-defined symbology identifier.
ü
Range is 0-4 characters.