Registry Key
TelepenActivation
TelepenCodeMark
TelepenBarCodeLengthL1
TelepenBarCodeLengthL2
TelepenBarCodeLengthL3
TelepenBarCodeLengthMode
TelepenFormat
TelepenUDSI
Code 11
Support for the parameters in the table is labeled as follows:
= Parameter is supported and available via the Scanner Options tab in the device profile.
ü
X
= Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 11]
Registry Key
Code11Activation
51
Default
A730
Value
0x0
ü
0x2a
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
C6
ü
Default
A730
Value
0x0
ü
Voice Device and Headset Hardware Reference Guide
A730x
Description
Enables the Telepen symbology.
ü
A single character inserted before the
barcode data to indicate the
ü
symbology.
Length value L1. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L2. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L3. Range is 0x0 to 0xFF
ü
(0 to 255).
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
ü
supported on A730x,
2 = "L1 is min, L2 is max length".
Sets output format, where
X
0 = ASCII and
1 = numeric.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x
Description
Enables the Code 11 symbology.
ü