Japan Post - Honeywell A700 Hardware Reference Manual

NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Australian Post]
Registry Key
AustralianPostActivation
AustralianPostCodeMark
AustralianPostUDSI

Japan Post

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Japan Post]
Registry Key
JapanPostActivation
JapanPostCodeMark
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0x0
ü
0x2a
ü
P3
ü
Default
A730
Value
0x0
ü
0x2a
ü
A730x Description
Enables the Australian Post symbology.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the Japan Post symbology.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
36