Pairing Initiated By A Bluetooth Device - Honeywell A700 Hardware Reference Manual

The Bluetooth address of the Bluetooth device as well as the security code (if security on
l
the device is enabled) for the device.
Access to VoiceConsole to set up the pairing. For production use, Honeywell recommends
l
that you create a specific device profile in VoiceConsole to store many of the following
settings.
Pairing instructions specific to your scanner.
l
For this one-to-one pairing, consider labeling both devices so that the correct pairs are
consistently used.
1. Using VoiceConsole, locate the specific Talkman device to be paired with the scanner.
2. View the properties of the device, and ensure that Bluetooth is enabled. If it is not enabled,
click Edit this device and set Bluetooth Enabled to "enabled."
A device profile can include the parameter Bluetooth_IsEnabled set to TRUE in the
advanced settings.
More information can be found in the Voice Console Online Help.
3. Select the Pair this device with a peripheral option.
4. For Pairing Type select "Bluetooth Scanner."
The parameter BarcodePort can be set to BT_SCAN for scanners or BT_PRINT for printers.
Configure this parameter in the advanced settings of the task package.
5. For Connection Mode select "Device initiates connection with peripheral."
6. In the Bluetooth Adress enter the Bluetooth MAC address of the scanner. This 12-character
ID is labeled "MAC ID" and is found on the device label.
7. For Security select "Enabled" if a security key is required.
8. For the Security Key enter four zeros (0000). Skip this step if a security key is not required.
9. Click Pair with peripheral to initiate pairing.
Note that you can also import a list of connected devices and set up those connections in
VoiceConsole. This "bulk pair" option may be useful in some situations.

Pairing Initiated by a Bluetooth Device

This method of pairing is useful if a scanner or printer will be used with more than one Talkman
A700/A700x device. It is usually more advantageous to allow a device to actively pair with the
Talkman as opposed to having Talkman initiate the pairing, permitting any Talkman to be used
with any device.
This pairing can be easily done with most scanners; however printers may not have the capability
to initiate the pairing process.
To enable a Talkman device to listen for a connection with a Bluetooth device you will need:
Access to VoiceConsole to set up the pairing. For production use, Honeywell recommends
l
that you create a specific device profile in VoiceConsole to store many of the following
settings.
More information can be found in the Voice Console Online Help.
Pairing instructions specific to your scanner.
l
Voice Device and Headset Hardware Reference Guide 258