Replacing The Ear Pad On The Sr-30, Sr-35 And The Sr-40 Headsets - Honeywell A700 Hardware Reference Manual

Replacing the Ear Pad on the SR-30, SR-35 and the SR-40
Headsets
1. With headset removed and disconnected, hold the headset in one hand.
2. At the seam on the bottom of the ear cup housing where the ear pad connects to the plastic
ear cup, pull the ear pad and plastic mounting plate outward until it disconnects.
3. Remove the worn ear pad from the plastic mounting plate and place the new ear pad over
the plastic mounting plate. Do not cover the three posts.
4. Line up the posts on the plastic mounting plate with the ear cup housing and snap into
place.
Voice Device and Headset Hardware Reference Guide 154