Srx2/Srx3 Battery Warm-Up Time; Srx2/Srx3 Hard-Hat Headset - Honeywell A700 Hardware Reference Manual

3. With your other hand, hold the battery at the end of the electronic module opposite the mic
boom.
4. Press and hold both battery latches at the same time, squeezing them into the sides of the
electronic module until the battery releases from the electronic module.

SRX2/SRX3 Battery Warm-Up Time

If a battery has been used in an extreme hot or extreme cold environment, charging will not start
immediately.
When the battery is placed in the charger, the battery port LED indicator will turn yellow.
Charging will only begin after the battery reaches the proper temperature range - 32 °F (0 °C) to
104 °F (40 °C). It may take up to 30 minutes for the battery to reach a safe temperature.
If battery temperature does not come into range in about one hour, the red LED will blink
indicating that there is a charger fault.

SRX2/SRX3 Hard-Hat Headset

In environments where operators must wear hard hats, the standard over-the-head headset is not
a viable option. The SRX2/SRX3 Hard-Hat headset has a built-in clip that attaches the headset
earpiece, electronic module, and microphone to most industrial hard hats. The Hard-Hat headset
supports most hard-hat models commonly used in the United States, Europe, and Japan.
Voice Device and Headset Hardware Reference Guide 112