Charging An A700/A700X Battery In A Device - Honeywell A700 Hardware Reference Manual

A700x and A700 devices use a Honeywell Charger that charges the high-performance battery
while still seated in a device and a separate charger for charging batteries that have been
removed from the device.

Charging an A700/A700x Battery in a Device

CAUTION
Do not attempt to place the device into the charger unless you have first disconnected the
headset and any other peripheral devices. Do not remove the battery from the device when
placing a device into a charger.
1. Remove the device from the belt clip.
2. Disconnect any wired peripherals.
3. Insert the device into an open slot on the charger, ensuring that the battery contact side of
the device is placed against the battery contact side of the slot.
4. After the device has been placed into the charger, make sure that the device state indicator
on the device turns on a solid yellow.
If the indicator does not turn on after 30 seconds, remove the device from the charger
l
slot and then place it into the slot again.
If the indicator still does not turn on, try another charger slot.
l
5. When the device battery is charged, the device state indicator is lit green.
13 Voice Device and Headset Hardware Reference Guide