Inserting A Battery Into The Srx2/Srx3 Wireless Headset - Honeywell A700 Hardware Reference Manual

TIP
A battery is fully charged and can be removed from the charger when the ring LED
l
indicator light for that port on the charger is green.
If you insert a fully charged battery into a charger, the charger will analyze the battery's
l
status and then "top off" the battery's charge. The ring LED indicator light for that port
will be yellow during this process. When complete, the ring LED indicator will turn
green.
1. Make sure the battery charger is powered. To power on the charger, connect the power
supply to the charger and a power source. The LED indicator light at the bottom right of
the charger face panel should be solid green.
2. Power off the headset by pressing and holding the Power button on the electronic module
for approximately one second.
3. Remove the battery from the headset electronic module.
4. Hold the battery with the Vocollect logo facing toward you, and push it onto an empty port
on the battery charger until it snaps into place.
5. Make sure that the battery is properly mounted on the charger port. The ring LED indicator
light will turn yellow or green when the battery contacts connect to the charger port
contacts. If the ring LED blinks red, the battery is not seated properly. Remove the battery,
and mount it on the port again.
6. When the ring LED indicator turns a solid green, the battery is fully charged. Pull the battery
off the charger port to insert it into a headset electronic module.
Inserting a Battery into the SRX2/SRX3 Wireless
Headset
1. Make sure the battery is charged. A battery is fully charged and can be removed from the
charger when the LED ring indicator on the charger port for that battery is green.
2. Position the headset electronic module with the buttons facing toward you.
3. Hold the battery with the label side down and contacts facing the open end of the
electronic module opposite the mic boom.
4. Push the battery onto the electronic module until it clicks in place.
Voice Device and Headset Hardware Reference Guide 110