Srx2/Srx3 Battery Charger Led Indicators - Honeywell A700 Hardware Reference Manual

Height
Input
Output
Cord
Operating
Temperature
Storage
Temperature
Humidity
NOTE
Packaging varies for product shipments. Generally, packing materials are about 15% of the
total shipment weight.
CAUTION
The 5V power supply for the 6-bay unit is a small wall-mounted supply at the end of the cord.
The Plug Socket of the power supply is considered the Disconnect Device to the A.C. Mains.
The socket-outlet shall be installed near the equipment and shall be easily accessible.

SRX2/SRX3 Battery Charger LED Indicators

The SRX2/SRX3 battery chargers have an LED indicator light, located at the bottom right of the
charger face, that signals the status of the charger.
165
20-Bay Charger
Approximately 15.7 cm (6.18 in.)
Power supply input voltage: 90VAC
to 264VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 12V
Power supply output power: 80W
max
Less than 40W required to charge 20
batteries from fully depleted to fully
charged.
Uses standard IEC 60320 plug
32 °F to 104 °F (0 °C to 40 °C)
-40 °F to 158 °F (-40 °C to 70 °C)
5% - 95% relative humidity, non-
condensing
6-Bay Charger
Approximately 12.06 cm (4.75 in.)
Power supply input voltage: 100VAC
to 240VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 5V
Power supply output power: 20W
max
Less than 10W required to charge 6
batteries from fully depleted to fully
charged.
Uses wall adapter with switchable
plugs provided in kit
32 °F to 104 °F (0 °C to 40 °C)
-40 °F to 158 °F (-40 °C to 70 °C)
5% - 95% relative humidity, non-
condensing
Voice Device and Headset Hardware Reference Guide