Code 32; China Post - Honeywell A700 Hardware Reference Manual

Registry Key
TriOpticUDSI

Code 32

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 32]
Registry Key
Code32Activation
Code32CodeMark
Code32UDSI

China Post

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
63
Default
A730
Value
H1 X
Default
A730
Value
0 X
0x2A X
H4 X
Voice Device and Headset Hardware Reference Guide
A730x Description
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the symbology.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.