Auto Pairing With A700/A700X - Honeywell A700 Hardware Reference Manual

them together steadily, until the device state (ring) indicator blinks green.
TIP
If the device state indicator blinks red, the NFC read was not successful, and you
should attempt to perform the read again.
5. When the device starts the task, VoiceConsole recognizes the pairing.

Auto Pairing with A700/A700x

Prerequisites:
The headset is powered off.
l
There is no wired headset connected to the Talkman device.
l
The Talkman device is Bluetooth ready with Bluetooth connection features enabled.
l
129 Voice Device and Headset Hardware Reference Guide