Installing The Srx2/Srx3 Hard-Hat Clip - Honeywell A700 Hardware Reference Manual

When using the TouchConnect™ feature to pair the SRX2/SRX3 Hard Hat Headset with a Talkman
A700/A700x Series device, you can obtain the operator ID by touching the device to the
symbol located on the outside of the headset earcup.

Installing the SRX2/SRX3 Hard-Hat Clip

The SRX2/SRX3 Hard-Hat headset attaches to the side of a hard hat using a clip that must be
mounted on the hard hat. Honeywell offers two clip styles, one designed to insert in a hard-hat
slot and one that mounts over the side brim of a non-slotted hard hat. Other hard-hat clips may
be purchased and used provided that they fit the hard hat and attach correctly to the SRX2/SRX3
earcup. Vendors such as Howard Leight™ offer these products.
NOTE
The hard-hat clips are not designed for frequent removal. It may be necessary to order extra
clips if users intend to alternate wearing the headset earcup on the left and right sides.
Inserting a slotted-mount clip in a hard hat
l
Position the clip with the tab pointing into the slot on the side of the hard hat.
l
The angle of the clip should follow the contour of the hard hat with the rubber stops
l
on the back side of the clip facing the hard hat.
113 Voice Device and Headset Hardware Reference Guide