Vocollect Connector For Wired Scanners - Honeywell A700 Hardware Reference Manual

Port Use for Peripherals with Honeywell Devices
Connection Talkman
Wired A720/A720x
A720/A720x *
Bluetooth
A710/A710x
A730/A730x
Talkman devices can interface not only with scanners and printers, but also any number of
devices capable of supporting a serial port protocol, such as RFID readers, label printers, and
serial device controls. Your Honeywell Representative can help you understand which specific
versions of hardware and software products are best suited for operations with other devices.

Vocollect Connector for Wired Scanners

Honeywell systems are designed to accommodate interfaces at a specific connection point. The
Talkman Breakaway Connector, or TCO, was carefully designed to meet several design
constraints.
Dirt and debris can collect in recessed surfaces. The TCO has a flat external connection
l
surface that prevents this problem. The connector end on the unit is sealed to protect the
unit from dirt and dust.
For safety, the connectors break away if a force strong enough to pull the wearer off-
l
balance is exerted.
The connectors are keyed, so that only the correct TCO cable (i.e. headset, bar code or
l
printer) may be inserted in any given TCO connection point.
The connector is extremely rugged.
l
These features make the connectors suitable for the extremes of a production environment. They
also decrease the need for service of the unit because of connector issues or failures.
197
For Head- For Scan-
set ning
Yellow port Blue port
✓ ✓*
* Either wired scanning or printing but not
both simultaneously
✓ ✓
* Use of a Bluetooth port disables the
corresponding physical port
✓ ✓
Voice Device and Headset Hardware Reference Guide
For Printing
Red port
✓*
✓
✓