Visual Training Devices; Training Through Voiceconsole's Display - Honeywell A700 Hardware Reference Manual

The LED indicator turns red and rotates for a few moments.
The ring segment then turns green.
The device says, "Please keep quiet for a few seconds." After a pause, the device says,
"Please say zero."
2. Say "Zero."
The device says "One."
3. Say "One."
The device says, "Two."
4. Say "Two."
The device says, "Please say the following words..."
5. As the device says each word, say it back to the device. The device will prompt you with the
same word at least four times; repeat the word each time it asks. If it prompts you for
phrases, say the phrase naturally, without pauses between the words.
When the device has asked for all words in the task the necessary number of times, the
device will say, "Creating voice templates. Please wait." It will then beep periodically until all
of the remaining voice templates have been created. When the remaining voice templates
have been created, the device says, "Finished creating voice templates." The device then
goes to sleep. You can begin the task by pressing the Play/Pause button.
This process can be improved when used in conjunction with the section "Training Using a
Printed List of Words" as found below.

Visual Training Devices

See Training.htm for visual training device options.

Training through VoiceConsole's Display

You can view the words the device asks you to train on a computer screen, through the user
interface, or pocket PC device screen as you go through the training process. See Viewing Dialog
Between a Device and an Operator in the VoiceConsole online help for more information.
Voice Device and Headset Hardware Reference Guide 30