Iata 2 Of 5 - Honeywell A700 Hardware Reference Manual

Registry Key
CompositeABActivation
CompositeCActivation
CompositeGS1-128Emulation
Composite
LinearOnlyTransmissionMode
CompositeUnconventional
CompositeCodeMarkCC-AB
CompositeCodeMarkCC-C
UPCAndEAN
CompositeMessageDecoding
CompositeABUDSI
CompositeCUDSI

IATA 2 of 5

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\IATA 2 of 5]
61
Default
A730
Value
0x0
ü
0x0
ü
0x0
ü
0x0
ü
0x0
ü
0x2a
ü
0x2a
ü
0x2
ü
G0
ü
G1
ü
Voice Device and Headset Hardware Reference Guide
A730x Description
Enables GS1 Composite with a CC-A or
ü
CC-B (Micro PDF417) 2D component.
Enables GS1 Composite with a CC-C
ü
(PDF417) 2D component.
Enables emulation of the GS1-128
ü
symbology.
Ignores the 2D portion and only
ü
transmits the 1D bar code.
Disable transmission of AIM identifier.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
A single character inserted before the
bar code data to indicate the
ü
symbology.
Decode mode for EAN/UPC
composites, where
0 = never linked (only EAN/UPC
transmitted),
ü
1 = always linked (2D component
required), and
2 = autodiscriminate.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.