Sr-35 Headset Specifications; Replacing The Ear Pad On The Sr-30, Sr-35 And The Sr-40 Headsets - Honeywell A700 Hardware Reference Manual

SR-35 Headset Specifications

Specification
Weight
Operating temperature
Storage temperature
Drop Tested
Enclosure rating
Humidity
Noise Reduction Rating
NOTE
Packaging varies for product shipments. Generally, packing materials are about 15% of the
total shipment weight.
Replacing the Ear Pad on the SR-30, SR-35 and the SR-40
Headsets
1. With headset removed and disconnected, hold the headset in one hand.
2. At the seam on the bottom of the ear cup housing where the ear pad connects to the plastic
ear cup, pull the ear pad and plastic mounting plate outward until it disconnects.
3. Remove the worn ear pad from the plastic mounting plate and place the new ear pad over
the plastic mounting plate. Do not cover the three posts.
4. Line up the posts on the plastic mounting plate with the ear cup housing and snap into
place.
Voice Device and Headset Hardware Reference Guide
Details
6.2 oz (175 g) with cable
4.7 oz (133 g) without cable
-40 °F to 122 °F (-40 °C to 50 °C)
-40 °F to 158 °F (-40 °C to 70 °C)
15 drops from 7 feet (2.1 m) at
l
minimum and maximum operating
temperatures
50 drops from 6 feet (1.8 m) at
l
minimum and maximum operating
temperatures
Meets IP67
5-90% condensing
Average 5 dB
152