Gs1 Databar - Honeywell A700 Hardware Reference Manual

Registry Key
TLC39Activation
TLC39
LinearOnlyTransmissionMode
TLC39ECISecurity
TLC39CodeMark
TLC39UDSI

GS1 DataBar

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\GS1 DataBar]
Registry Key
DatabarOmniDirectionalActivation
DatabarLimitedActivation
DatabarExpandedActivation
57
Default
A730
Value
0x0
ü
0x0
ü
0xa
ü
0x2a
ü
H0
ü
Default
A730
Value
0x0
ü
0x0
ü
0x0
ü
Voice Device and Headset Hardware Reference Guide
A730x Description
Enables the TLC 39 symbology
(requires Micro PDF417 and Code
ü
39 to be enabled as well).
Ignores Micro PDF417 data and
X only transmits the Code 39
portion.
Selects how much time is spent
looking an ECI number if the Code
X 39 portion of the label is 6 digits.
Range is 0x0 - 0x64 (0 to 100),
where 0x0 is fastest.
A single character inserted before
the barcode data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the DataBar
X *
Omnidirectional/RSS 14 symbology.
Enables the DataBar Limited/RSS
X *
Limited symbology.
Enables the DataBar Expanded/RSS
X *
Expanded symbology