Canada Post; Australian Post - Honeywell A700 Hardware Reference Manual

Registry Key
BPOActivation
BPOCodeMark
BPOCheckDigitTransmission
BPOUDSI

Canada Post

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Canada Post]
Registry Key
CanadaPostActivation
CanadaPostCodeMark
CanadaPostUDSI

Australian Post

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
35
Default
A730
Value
0x0
ü
0x2a
ü
0x1
ü
P2
ü
Default
A730
Value
0x0
ü
0x2a
ü
P6
ü
Voice Device and Headset Hardware Reference Guide
A730x Description
Enables the British Post Office
ü
symbology.
A single character inserted before the
bar code data to indicate the
ü
symbology.
X Enable transmission of the check digit.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the Canada Post symbology.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.