Sweden Post - Honeywell A700 Hardware Reference Manual

Registry Key
JapanPostCheckDigitTransmission
JapanPostUDSI
Dutch Post
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Dutch Post]
Registry Key
DutchPostActivation
DutchPostCodeMark
DutchPostUDSI

Sweden Post

Support for the parameters in the table is labeled as follows:
= Parameter is supported and available via the Scanner Options tab in the device profile.
ü
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
37
Default
A730
Value
0x1
ü
P5
ü
Default
A730
Value
0x0
ü
0x2a
ü
P4
ü
Voice Device and Headset Hardware Reference Guide
A730x Description
X Enable transmission of the check digit.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the Dutch Post symbology.
ü
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.