Table of Contents
Advertisement
NOTE
Packaging varies for product shipments. Generally, packing materials are about 15% of the
total shipment weight.
Wearing the SL-14 Behind-the-Head Headset
1. Adjust the headset's adjustable headband so it will fit snugly on your head.
2. Place the headset behind your head, and slip the ear loops over your ears.
3. Place the microphone at the corner of your mouth. Position the microphone as close to
your mouth as possible, but outside of your breath stream. It should be facing your upper
lip, and not touching anything (for example, clothing, skin, or facial hair).
4. Clip the headset cord to the collar or top of your shirt or jacket where it can comfortably
fall down your back. This keeps the cord away from your chest and arms where it can
become tangled with your work.
5. Let the cable fall down your back, and clip it to the belt near the device.
6. Connect the headset to the device.
Proper Use and Care Instructions for SL-14 Headsets
The equipment you have purchased has been carefully inspected at the factory. It is not designed
to withstand abuse, including use in condensing, wet or freezing conditions. The instructions
below are designed to ensure the equipment continues to function in accordance with the
published specifications. Damage may be caused to the equipment when used or maintained in
an improper manner. Honeywell will not honor repair or replacement requests for damages
caused by improper use, maintenance, negligence or abuse, including, but not limited to, those
specifically identified below. In these cases, a replacement headset purchase is required,
regardless of the age or warranty status of the original equipment.
SR-15 Vocollect Behind-the-Head Headset
The SR-15 Vocollect behind-the-head headset is designed for workers who cannot wear typical
over-the-head headset models due to hair style, headwear, or comfort issues.
Voice Device and Headset Hardware Reference Guide
142
Advertisement
Table of Contents
Troubleshooting
