Led And Tones - Honeywell SRX-SL User Manual

Desired Action
Connect to last device
Reset headset (use to restart
the headset in the rare event
the SRX-SL headset has be-
come unresponsive)

LED and Tones

The SRX-SL contains a single LED that signals events to the user. The LED is accompanied by tones to signal these
events when the headset is being worn.
Use Case
Pairing mode, default state at
power up.
Powering off
Normal operation
Pairing Failure
Disconnect/clear paired devic-
es/enter pairing mode
Volume up
Volume down
Mute Toggle
Mute reminder tone
Incoming call
Connection dropped
Voice link established
Voice link dropped
Audio Transfer Toggle
Normal operation low battery
USB plugged in
USB plugged in
Button Press
Momentary press of Power button
5 second simultaneous press of Power and
Mute buttons
SRX-SL State
Discoverable and Connectable.
Off
Paired and connected.
Discoverable and Connectable
Discoverable and Connectable.
Volume increases
Volume decreases
Mic is muted, or voice applica-
tion paused
Mic is muted via Mute button,
with active audio
No reminder tone if muted via
boom rotation.
Paired and connected with HFP
device
Connectable but not discover-
able. Any Bluetooth device can
connect to it if it knows the ad-
dress.
e.g. answer call, start voice app Normal operation
e.g. hang up call
Audio transferred to/from head-
set
Paired and connected, low bat-
tery.
USB Charging, Bluetooth dis-
abled.
USB Charging complete, Blue-
tooth disabled
Valid In These SRX-SL States
On and paired, but not connected
All except Off
LED
Solid green
Solid green for 1 second
then all off.
Flashing blue.
Flash frequency is 1.5 sec-
onds.
On 20%, off 80%.
Solid Green
Brief rapid flashing of
GREEN LED's to acknowl-
edge command, then
green LED on Solid
Normal operation
Normal operation
Normal operation
Normal operation
Three rapid blue flashes at
1 second intervals.
Flashing green.
Flash frequency is 1.5 sec-
onds.
On 20%, off 80%
Normal operation
Normal operation
Flashing Red.
Flash frequency is 1.5 sec-
onds.
On 20%, off 80%.
Solid Red
Solid Green
Tones
High pitch double beep at
power up
Low pitch double beep at
power off
Three ascending tones on
connect
Long Low Tone
Short single tone (gets
louder as volume increas-
es)
Short single tone (gets
softer as volume decreas-
es)
Short high tone
Single short low beep ev-
ery 30 seconds
Ascending scale ringtone
Three descending tones
when connection dropped
Two low to high tones
Two high to low tones
Short single tone
5 rapid alternating tones lo
hi lo hi lo
Repeats every 5 minutes
1 - 3