Wearing An Srx3 Wireless Headset; Installing The Stability Strap On The Srx3 Wireless Headset - Honeywell SRX3 User Manual

Wearing an SRX3 Wireless Headset

1. Put the headset on and adjust the ear pad to fit snugly over your ear.
2. Position the t-bar directly above, and as closely as possible to, your other
3. If installed, adjust the stability strap so it fits securely across the back of your
4. Rotate the electronics module up or down to position the microphone near
5. Make final adjustments with the flexible boom so that the microphone is
Installing the Stability Strap on the SRX3
Wireless Headset
1. Hold the headset so that the earpad faces you and the electronics module
2. Locate the knob on the inside of the headband near the earpad.
3. Hold the strap so that the end with the hole fits over the knob on the
17
ear.
head.
your mouth.
positioned correctly. Position the microphone as close to your mouth as
possible, but outside of your breath stream. It should be facing your upper
lip, and not touching anything (for example, clothing, skin, or facial hair).
faces away.
headband, and press down firmly so the knob comes all the way up through
SRX3 User Guide - Preliminary