Writing Address Setting; Speed; Confirmation - Ulvac G-TRAN Series Instruction Manual

Writing address setting

Command : AD0
 "n n" is the set value.

From 01 to 31 can be set.
 If the command is received normally, 'o' is returned.
Reading communication speed
Command : AD0
Return format from this unit to PC.
： AD0 AD1 4BR

"n" indicates the following:
0: 38400 1: 19200 2: 9600
Writing communication speed
Command : AD0

"n" indicates the following:
0: 38400 1: 19200 2: 9600

If the command is received normally, 'o' is returned.
Enabling checksum confirmation
Command : AD0

If the command is received normally, 'o' is returned.
Disable checksum confirmation
Command : AD0
 If the command is received normally, 'o' is returned.
Checksum confirmation status confirmation
Command : AD0
Return format from this unit to PC.
： AD0 AD1 CS

"n" indicates the following:
e: Checksum confirmation is valid
f: Checksum confirmation is invalid
AD1 4AW n n
AD1 4BR
n CHKH CHKL
AD1 4BW n CHKH
AD1 CSN CHKH CHKL
AD1 CSF CHKH CHKL
AD1 CS CHKH
n CHKH CHKL
42
CHKH CHKL CR
CHKH CHKL CR
CR
CHKL CR
CR
CR
CHKL CR
CR