Unpacking And Checking Accessories; Accessories; Items That Need To Be Ordered - Ulvac G-TRAN Series Instruction Manual

2.1.

Unpacking and checking accessories

When the product arrives, please unpack, and check the product. Also, please check
for any damage from transportation and make sure that there are all accessories.

Accessories

Multi ionization gauge sensor unit SH200 (main unit)
※
Sensor for SH200
Quick manual (regular paper)
※ Depending on the order, the sensor for SH200( M-4* or M-3*) may or
may not be included.
Items that need to be ordered separately
Sensor for SH200
(flange size)
Connector for SH200
Calibration certificate
Inspection certificate
Traceability certificate
Display unit
Display cable
Pirani gauge SWU
Sensor for SWU
Pirani gauge SPU
Sensor for SPU
Pressure sensor unit SAU
Unit cable GUC-200P
Unit cable GUC-200A
M-44 (NW16), M-45 (NW25), M-46 (ICF70)
M-34 (NW16), M-35 (NW25), M-36 (ICF70)
D-sub15pin connector (female), M2.6 screw ※unwired
Calibration certificate, JCSS calibration certificate
Model ISG1 (DC24V power supply)
Cable between SH200 and display unit
2m, 5m, 10m, 15m, 20m, 25m, 30m, 35m, 40m
SWU and SPU cannot operate at the same time.
SWP-16, SWP-25, SWP-R1/8, SWP-P18, SWP-P15, SWP-CF16
SWU and SPU cannot operate at the same time.
WP-01, WP-02, WP-03, WP-16
Between SH200 and SWU/SPU 0.5m, 1m, 2m
Between SH200 and SAU
GUC-200A
GUC-200P
SAU
SWU
Sensor
for SWU
※ SWU can be replaced with SPU.
3
1
1
1
0.5m, 1m, 2m
Display Cable
→Display unit
Connector
for SH200
(unwired)
SH200
Sensor
for SH200