AMETEK CTS
7.15.
Power ON the vsurge NX20 generator
Approx. 3-4 seconds after power on the generator will drive the ventilator at full speed during few seconds. Then the
ventilator returns to a variable speed control concerning the temperature.
Booting
After the welcome screen, the software scans the
equipment for search all existing internal
phenomenon's and external devices.
A list shows and lists all detected modules.
Main Menu
7.16.
How to use the vsurge NX20
Please refer to Chapter 12: "How to use a NextGen device".
Quick start guide - Single pulse generators
1.00
49 / 88