Quick Start Guide Nsg 3150; Scope Of Delivery Nsg 3150; General - Ametek burst NX8 Quick Start Manual And Safety Instructions

Surge, burst, damped oscillatory, telecom surge generators
Table of Contents

Advertisement

AMETEK CTS
11.

Quick start guide NSG 3150

11.1.

Scope of delivery NSG 3150

Using the following list, check that all the items ordered have been delivered:
1. NSG 3150 generator
2. User manuals
3. 1 mains power cables for the test system
4. 1 termination plug (interlock blind connector)
5. 1 ground cable (to reference ground plane)
6. WIN 3000 Remote control software (trial version)
7. Ethernet cable, type: SFTP, CAT 5e, 2 m
8. Ordered options
Check the instrument for signs of transport damage. Any damage should be reported to the transportation company immediately.
Items delivered with optional CDN
1. CDN 3153-S63.1 coupling network (optional)
2. 1 mains power cables for the test system
3. 2 HV surge cables GES S125 pro (only with CDN)
4. 1 system cable (connects the CDN to the NSG)
5. 1 EUT power output connector High voltage screw driver
11.2.

General

The NSG 3150 must be operated only by authorized and trained specialists.
The generator is to be used only for the purpose specified by the manufacturer. The user is directly responsible for ensuring
that the test setup does not cause excessive radiated interference which could affect other instrumentation. The test system
itself does not produce any excessive EM radiation. However, the injection of interference pulses into a EUT can result in it and
/ or its associated cables radiating electromagnetic radiation. To avoid unwanted radiation, the standards organizations
recommend that the test setup be operated inside a Faraday cage.
WARNING - Because of its construction, the NSG 3150 is not suitable for use in an explosive
atmosphere.
WARNING - Personnel fitted with a heart pacemaker must neither operate the instrument nor
approach the test setup while a test is being executed.
Only approved accessories, connectors, adapters, etc. are to be used to ensure safe operation.
WARNING - Connect the EUT only after the initial system selftest has finished.
-
The safety is not guarantee when using the device in other application than specified.
-
Under normal operating conditions no toxic gases are released.
-
Take care to have access to all connectors for disconnect them in no time in case of emergency.
Quick start guide - Single pulse generators
1.00
78 / 88

Advertisement

Table of Contents
loading

Table of Contents