AMETEK CTS
6.8.
Power ON the burst NX8 generator
Approx. 3-4 seconds after power on the generator will drive the ventilator at full speed during few seconds. Then the
ventilator returns to a variable speed control concerning the temperature.
Booting
After the welcome screen, the software scans the
equipment for search all existing internal
phenomenon's and external devices.
A list shows and lists all detected modules.
Home screen after booting
The home screen shows all detected symbols of
phenomenon with their color.
Next steps:
1.
Menu / EUT for
- EUT configuration setup
2.
Menu / Setup for
- System settings
- External coupler settings
6.9.
How to use the burst NX8
Please refer to Chapter 12: "How to use a NextGen device".
Quick start guide - Single pulse generators
1.00
30 / 88