Table of Contents
Advertisement
AMETEK CTS
10.8.
Main Menu OCS 500N6.x
Page 1
MAIN MENU
F1 : Damped Osc.
F2 : Damped Osc.
F3 : Ringwave
F4 : Damped Osc.
F5 : Damped Osc.
F6 : Damped Osc.
F7 : Service
F1
F2
F3
F1 Damped Oscillatory 100 kHz
With function key F1 the user can select Damped Oscillatory 100 kHz as per IEC 61000-4-18. The test pulses are oscillatory
waves with a frequency of 100 kHz and a rise time of 75ns.
F2 Damped Oscillatory 1MHz
With function key F2 the user can select Damped Oscillatory 1MHz as per IEC 61000-4-18. The test pulses are oscillatory
waves with a frequency of 1MHz and a rise time of 75ns...
F3 Ringwave 100 kHz
With function key F3 the user can select the Ring Wave 100 kHz as per IEC 61000-4-12. The test pulses are oscillatory
waves with a frequency of 100 kHz and a rise time of 0.5s.
F4 Damped Oscillatory 100 kHz Magnetic Field
With function key F4 the user can select the Damped Oscillatory Magnetic Field Test as per IEC 61000-4-10. The test pulses
are the same as used under F1 Damped Oscillatory 100 kHz.
F5 Damped Oscillatory 1MHz Magnetic Field
With function key F5 the user can select the Damped Oscillatory Magnetic Field Test as per IEC 61000-4-10. The test pulses
are the same as used under F2 Damped Oscillatory 1MHz.
F6 Damped Oscillatory 1MHz Ext.
With function key F6 the user can select Damped Oscillatory 1MHz as per IEC 60255-26 with coupling to the external
coupling device CNV 508N4. The test pulses are oscillatory waves with a frequency of 1MHz and a rise time of 75ns...
F7 Service
Setup and servicing routines are available.
100 kHz
IEC 61000-4-18
1MHz
IEC 61000-4-18
100 kHz
IEC 61000-4-12
100kHz MF
IEC 61000-4-10
1MHz MF
IEC 61000-4-10
1MHz ext.
IEC 60255-26
F4
F5
F6
Quick start guide - Single pulse generators
F7
1.00
74 / 88
Advertisement
Table of Contents
