Starting A Test; The Test Run; Info: Button Status Indicators - Ametek burst NX8 Quick Start Manual And Safety Instructions

AMETEK CTS
12.10.

8. Starting a test

12.11.

9. The test run

12.12.

Info: Button Status indicators

White: HV and EUT Power Disabled
Green: Ready or Paused
Red: Testing
Quick start guide - Single pulse generators
1. Press "TEST ON" to enable High voltage
and power to the EUT
2. Press "START/PAUSE" to start a test.
3. Long press "START/PAUSE" for continuous
test.
1. Press "START/PAUSE" to pause or press
"STOP" to stop a test.
2. Press "START/PAUSE" to continue or start
a test.
3. After Stop press "BACK" to return to Menu
or tap the ←.
Yellow: HV and EUT Power Enabled
Orange: Testing
Red blinking: Error
1.00 87 / 88