Table of Contents
Advertisement
AMETEK CTS
7.9.
Front view vsurge NX15
1
Active indication
2
USB input (Memory stick)
3
Touch screen
4
Back
5
Knob (Inc. / Dec /Enter)
1
ACTIVE
Indicates that this unit is active.
2
USB input (Memory Stick)
Input plug for a memory stick for export / import test reports or test and link-files. From this port, the user can load setup
pictures, updates and other files to the vsurge NX15 generator.
3
Touch screen and user interface
The user controls the equipment with the 7" capacitive touch screen display. The display indicates the status of the generator
and test equipment.
4
BACK button
- Returns from a stopped test to the input screen.
- Same effect with two fingers swipe on the screen, slide them from right to left
5
Wheel (Inc. / Dec / Enter)
Rotate for increments or decrements a selected parameter. Push change the digit and hold with a numeric value or
selects from a list of parameters. Press to change adjustment range. Selected range will be shown briefly next to
selected parameter. Push and hold to "zero" to nearest range.
6
Test On
By pressing the key "Test On" follows the functions:
- Activate the high voltage power unit; HV is ready to start.
- Switches ON the supply to the EUT test supply (only with built in Power Fail module).
6
" Test On"
7
Start / Pause / Stop
8
CRO I (surge)
9
CRO V (surge)
CRO Trigger output 5V
10
1.00
Quick start guide - Single pulse generators
11
LED bar for charging voltage
12
High/Low-output
37 / 88
Advertisement
Table of Contents
