Ametek burst NX8 Quick Start Manual And Safety Instructions page 41

AMETEK CTS
1 Reference earth connection
2 Ventilator
3 Power On Switch
4 Mains input
5 External Trigger IN
11 Sys Link IN
Sys link is the internal control bus to the connected vsurge NX devices. The sys link is a daisy chain wired bus for connect
the devices in series. The bus includes a 26 pole high density connectors. This port is terminated with the SSC AD Safety
circuit adapter with a short circuit.
12 USB interface (for service purpose)
USB interface "USB B" connector for service purpose with an external computer.
13 USB connector
USB connector "USB A" connector, same as the USB input at the front side.
6 Sync input
7 Sys Link OUT
8 Ethernet interface
9 Opto Link Interface
10 Fail, EUT 1, EUT2
1.00
Quick start guide - Single pulse generators
11 Sys Link IN
12 USB B interface
13 USB A interface
41 / 88