Front View Vsurge Nx20 - Ametek burst NX8 Quick Start Manual And Safety Instructions

AMETEK CTS
7.13.

Front view vsurge NX20

1 Active indication
2 USB input (Memory stick)
3 Touch screen
4 Back
5 Knob (Inc. / Dec /Enter)
1 ACTIVE
Indicates that this unit is active
2 USB input (Memory Stick)
Input plug for a memory stick for export / import test reports or test and link-files. The user can load from this port setup
pictures, updates and other files to the Vsurge NX20 generator.
3 Touch screen and user interface
With the 7" capacitive touch screen display the user controls the equipment. The display indicates the status of the generator
and test equipment.
4 BACK button
- Returns from a stopped test to the input screen.
- Same effect with two fingers swipe on the screen, slide them from right to left
5 Wheel (Inc. / Dec / Enter)
Rotate for increments or decrements a selected parameter. Push change the digit and hold with a numeric value or
selects from a list of parameters. Press to change adjustment range. Selected range will be shown briefly next to
selected parameter. Push and hold to "zero" to nearest range.
6 Test On
By pressing the key "Test On" follows the functions:
- Activate the high voltage power unit; HV is ready to start.
- Switches ON the supply to the EUT test supply (only with built in Power Fail module).
6 " Test On"
7 Start / Pause / Stop
8 CRO I (surge)
9 CRO U (surge)
CRO Trigger output  5V
10
1.00
Quick start guide - Single pulse generators
11 LED bar for charging voltage
12 EUT test supply
13 Polarity selection
14 Range selection
15 Short circuit for load range
43 / 88