Technical Data Vss 500N12.X - Ametek burst NX8 Quick Start Manual And Safety Instructions

Surge, burst, damped oscillatory, telecom surge generators

Hide thumbs

Table Of Contents

Table of Contents

AMETEK CTS

Test level

Selectable phase angle to superimpose the pulse to the mains (only with external CDN)

+/-

Polarity of the generated pulse

Cpl

Not used in VSS generators

rep (t1)

Repetition rate of the generated pulses

tri

Trigger mode; AUTO, MAN or EXT

Number of pulses to be generated

All function keys with exception of F2 (manual Trigger) will stop the test.

Page 4 (Start)

VOLTAGE SURGE

= 4000 V

+/-

rep

10 s

= endless

Uset = 4000V

U =

STOP

I =

After the Start button was pressed the test voltage indication is blinking. The user can change the blinking value by turning the

digital knob. Any parameter to be changed can be selected by the operator by using the cursor buttons Up and Down.

All functions keys except F2 (MAN TRIGGER) can stop the test routine. The latest setting will be displayed.

Pressing the ESC button will bring the user back to the previous level.

Any pressing of a function key will indicate the functions START, CHANGE, CONTINUE or PRINT. F3 will continue the same

test routine. Also the test time will continue running. If the user selects at first START, CHANGE or PRINT the test will be

stopped completely.

Page 4 (Change)

Surge

Voltage

Angle

Events

Repetition

rep

+/-

coupl

500

The possible range is displayed for each parameter selected.

The value for change can be selected with the function key and than changed with the INC/DECR knob. By moving the cursor

the digit to be changed can be selected to speed up the procedure.

With ESC the operator can go back to the previous menu and start testing with the new parameters.

8.7.