Ametek burst NX8 Quick Start Manual And Safety Instructions page 26

AMETEK CTS
1 Active indication
2 Touch screen
3 Knob (Inc. / Dec /Enter)
4 " Test On"
CRO Trigger output  5V
5
10 STOP button
- Red indication: Stop a running or paused test.
11 BACK button
- Returns from a stopped test to the input screen.
- Same effect with two fingers swipe on the screen slide them from right to left
12 AC / DC test supply
Indicates whether an AC or DC supply has been selected
Coupling mode (50  output)
13
The LED indicates whether the 50  output is active.
14 Coupling mode (supply lines)
The LED indicates
- actual coupling mode of the Burst impulses to lines L1/DC+, L2, L3, N/DC- and PE
15 USB input (Memory Stick)
Input plug for a memory stick for export / import test reports or test and link-files. The user can load from this port setup
pictures, updates and other files to the burst NX8 generator.
HV pulse Burst output 50 
6
7 EUT test supply
8 Ground reference (calibration)
9 Start / Pause
10 Stop
1.00
Quick start guide - Single pulse generators
11 Back
12 AC / DC test supply
Coupling mode (50  output)
13
14 Coupling mode (supply lines)
15 USB input (Memory stick)
26 / 88