AMETEK CTS
3.2.
Warning lamp
3.2.1.
Warning lamp for burst NX and vsurge NX
The warning lamp offers a voltage free contact that indicates the
status of the generator system.
Design
Each device with warning lamp function can short thewarning
lamp contact. An external powered relays max. 60 V / 2 A is
controlling the lamp. The user is responsible for the warning lamp
power supply
Warning Lamp switch closed (red):
- Safety circuit is closed and TEST ON is on
Status: RED Lamp, Power on EUT output,
High voltage can be "switched ON"
Warning Lamp switch opened (green):
- Safety circuit is open and / or TEST ON is off
- Generator is switched off
Status: GREEN Lamp, no danger, High voltage is off
Quick start guide - Single pulse generators
Figure 15 - Warning Lamp Connection
1.00
14 / 88