Table of Contents
Advertisement
7 Configuration
7.25
Time server (SNTP)
The time and date of the paperless recorder can be synchronized with a time server using the SNTP
protocol (Simple Network Time Protocol).
Device dialog box
Parameter
Parameter
Synchronize with
server
SNTP server
?
1
2
3
Period
SNTP server
The server list is processed top down, in other words, the next time server on the list is only queried if
the previous server is unreachable. If no time server can be reached at the envisaged sync time, syn-
chronization is retried later (the repeat time starts at 1 minute and varies). After five unsuccessful at-
tempts, a "Time server error" message is added to the event list. After a wait, another attempt is made
to synchronize the time.
Time zone and daylight saving time
The SNTP server always provides the UTC time so that both the time zone and the time for switching to
daylight saving time are only defined by the device configuration (Configuration > Date and time).
188
Selection/settings
No
Yes
The device supports up to three time servers (SNTP). Specify the DNS name if pos-
sible and not the IP address.
Enter server address
Enter server address
Enter server address
1 h
12 h
24 h
Description
Time/date of device are not synchro-
nized.
Time/date of device are periodically syn-
chronized with a time server.
First time server
Second time server
Third time server
Synchronization every hour
Synchronization every 12 hours
Synchronization every 24 hours
Advertisement
Table of Contents
