Table of Contents
Advertisement
7 Configuration
7.14
Counters/integrators
The counters/integrators can be configured as counters, integrators, operating time counters, high-
speed counters, or for determining the total flow (volume):
•
Counters are used to count digital signals.
•
Integrators are used to integrate analog inputs.
•
Operating time counters are used to measure the length of time that digital signals have been active.
•
A high-speed counter can be used to record counter pulses up to 12.5 kHz (via certain optional in-
puts; see technical data).
•
The total flow is determined by integrating the volume flow (see chapter 7.15 "Flow", Page 142).
Stored counter and integrator statuses can be evaluated with the PCA3000 evaluation software on the
PC.
7.14.1
General settings
Device dialog box
Parameter
Parameter
Synchronization
time
?
Daily start
Daily end
Period
132
Selection/settings
00:00:00 to 23:59:59
00:00:00 to 23:59:59
00:00:00 to 23:59:59
1 min, 2 min, 3 min, 4 min, 5 min,
10 min, 15 min, 30 min,
1 h, 2 h, 3 h, 4 h, 6 h, 8 h, 12 h
Description
Synchronization time for completion and
restart of counters or integrators for
which the "Type" parameter is configured
as "Periodical", "Daily", or "Weekly".
Start time of counters or integrators
whose "Type" parameters are configured
as "Daily from/to".
End time of counters or integrators
whose "Type" parameters are configured
as "Daily from/to".
Pulse period of counters or integrators
for which the "Type" parameter is config-
ured as "Periodical".
Advertisement
Table of Contents
