Table of Contents
Advertisement
7.20
Batches
The device supports reporting of one batch. The batch data is recorded along with the channels for the
groups and displayed in batch visualizations.
NOTE!
To use batch reporting at least one group must be active.
7.20.1
General Information
Device dialog box
Parameter
Parameter
Batch active
Batch name
Group assign-
ment
Batch start
Control signal
Selection/settings
Yes, No
Batch ...
Select groups in drop-down menu (set
checkmark).
Batch 1: group 1
Barcode
Inactive
Control signal
Touchscreen
Digital selector
No selection
7 Configuration
Description
The selected batch can only be config-
ured if "Yes".
Designation with a maximum length of
15 characters that is used in visualiza-
tions.
Assigned groups are shown with 1 (in
this case: group 1).
Start and stop of batch reporting are con-
trolled by a barcode scanner.
Batch is not recorded.
Start and stop of batch reporting are con-
trolled by a digital signal.
Start and stop of batch reporting are con-
trolled by a button on the screen.
Signal that is used to start (high active)
and stop batch reporting. The parameter
is only available for batch start with "Con-
trol signal".
173
Advertisement
Table of Contents
