Table of Contents
Advertisement
Parameter
Selection/settings
Editable
This parameter enables editing of the text within the current batch report.
Yes, No
Text number
Analog selector
No selection
Text comparison
The length of the text in the right column (except batch start, batch end, and batch
duration) can be checked, or the text can be compared with text from a definable
area of the text list (first text; number of texts). The result is available in the analog
selector.
Inactive
Text length
Text list
First text
1 ...
Number of texts
1 ... 50
7 Configuration
Description
If "No," the text in the right column can
only be edited by modifying the "Default
text".
If "Yes", the text in the right column – for
the current batch report – can be
changed. Depending on the "Delete line"
parameter, the configured text can be re-
activated automatically after the batch
report is completed.
The parameter is available if the text in
the right column is composed of the in-
ternal text list (batch texts) (for selection
by "Text number").
The text number is defined by the value
of the analog signal. If there are decimal
places, the system rounds up or down to
the nearest integer.
If there is no text at the selected point in
the text list (or if the value is outside the
value range), no entry is made in the
batch line (existing text is deleted).
The function is inactive (result = 0).
The result corresponds to the text length.
If the text matches a text from the de-
fined area of the text list, its index (posi-
tion in the list area, beginning with 0) is
output as the result. Otherwise the value
-1 is output.
First text from the text list which is used
for the text comparison.
Number of texts in the text list for the text
comparison (as from the first text).
177
Advertisement
Table of Contents
