5 Operation
choose any starting time in the past. Using the additional parameter "Save counters/reports" it is pos-
sible to save the current readings of the counters and integrators as well as the statistics (report) –
even if they have not yet been completed – along with the recording data.
•
Writing current counter/statistics and recording data to the USB flash drive:
The current counter and integrator statuses, as well as the statistics (report) are read out, and written
to the USB flash drive along with the newly added recording data.
•
Reading configuration from USB flash drive:
The configuration data (except the user list) is transferred from the USB flash drive to the device.
This reconfigures the device and data recording is restarted.
•
Writing configuration to USB flash drive:
The configuration data (incl. the user list) is transferred from the device to the USB flash drive.
•
Writing service data to USB flash drive:
Internal service data is transferred to the USB flash drive and can be sent to the device manufacturer
for diagnosis.
•
Software update:
Function for updating the device software; the USB flash drive must contain specific files provided
by the device manufacturer.
•
Reading user list from USB flash drive:
The user list is transferred from the USB flash drive to the device and activated.
CAUTION!
Data loss due to software update.
A software update deletes all recording data stored on the device (incl. counters/integrators and statis-
tics).
Before updating the software, save (back up) the recording data on a USB flash drive.
66