Table of Contents
Advertisement
Toolbar
The toolbar contains selected functions from the menu bar. These can be launched by left-clicking on
them. Hovering the mouse pointer over one of the icons displays the name of the function after a few
seconds.
Moving the toolbar
The user can change the position of the toolbar:
Step
1
2
3
4
Possible positions of the toolbar:
•
Along the left or right window border (vertical alignment)
•
Below the menu bar (horizontal alignment),
•
Along the lower edge above the user information (horizontal alignment)
•
Any position (its own window - any alignment by changing the window size)
Closing the toolbar
Once the toolbar has been moved, it can be closed by clicking the
again, it must be activated in the File > Default settings menu under User interface (select checkbox).
The toolbar then appears at the location to which it was previously moved. Double-clicking on the free
space above the symbols (or between two groups of symbols) moves the toolbar back to its original po-
sition underneath the menu bar.
Working area
The working area comprises the navigation tree (left) and the display window (right); it shows the current
settings of a configuration file (setup file).
chapter 6.4 "Setup file", Page 87
The way the working area is divided can be changed by moving the border between the navigation tree
and display window sideways with the aid of the left mouse button.
Action
Position the mouse pointer between two groups of symbols.
Press the left mouse button.
While holding down the left mouse button, drag the toolbar to the desired location.
Release the left mouse button.
6 Setup program
button. To display the toolbar
79
Advertisement
Table of Contents
